Here comes the future!
Weighing just 13 kg, the XA2 is the lightest cordless hydraulic power unit on the market – ideal for mobile use. You can tighten up to 160 bolted joints on a single battery charge, with full control at all times via the digital display. Three variants to choose from: power, docu and control – and upgradeable at any time, so you can grow with your requirements!
THE WORLD’S LIGHTEST BATTERY-POWERED, HIGH-PERFORMANCE PUMP WITH AUTOMATIC FUNCTION
The XA2power is the ideal entry-level model in our range of battery-powered hydraulic pumps: lightweight, portable, fast and robust for everyday use. Operation is child’s play via a menu-driven display with direct Newton metre input – the desired torque is set in seconds, with no fuss. Thanks to the wired remote control, you retain full control even from a distance.
At its heart lies the precise torque-controlled tightening process: this guarantees reproducible, reliable fastening results. This makes the XA2power the perfect foundation, expandable at any time to docu or control.
DISPLAY Direct input of bolting parameters
REMOTE CONTROL Convenient operation even in confined spaces, automatically or manually
BATTERY 8Ah high-performance battery for up to 160 fastening operations and a charging time of 20 minutes to 80% capacity
OIL CAPACITY 2.5 litres of oil, allowing even larger tools to be operated
BUY NOW, UPGRADE LATER
Buy XA2power today, upgrade for free later.
At launch, early adopters will benefit from exceptional flexibility:
Anyone who chooses the XA2power by 30 September 2026 can upgrade to the XA2docu or XA2control via an over-the-air update as soon as these become available. This upgrade is free for early adopters. This allows you to secure the new XA2 platform today whilst remaining open to future requirements such as digital documentation, Wi-Fi transmission or advanced screwdriving methods.
Enquire about the XA2power now and secure your upgrade benefit.
High-tech for the mobile operation of hydraulic bolting systems
The XA2 battery-powered hydraulic unit operates at a maximum working pressure of 800 bar and can therefore be used for hydraulic torque wrenches and other hydraulic applications requiring this level of pressure.
Power is supplied by interchangeable 28 V batteries, each with a capacity of 8 Ah. This means the hydraulic pump can be used independently of a fixed mains power supply. Weighing 13.3 kg including batteries and measuring just 520 × 260 × 225 mm, the unit is ideally suited for mobile use.
Manual and automatic operation
The XA2power can be operated both automatically and manually. This allows the operating mode to be adapted to the specific hydraulic application and workflow.
For applications involving hydraulic torque wrenches, the maximum operating pressure of 800 bar is particularly relevant. The pump supplies the hydraulic power to the connected wrench, which then converts the hydraulic pressure into the torque required for the bolting operation.
Battery-powered hydraulic unit for mobile use
As it operates using two interchangeable batteries, the XA2power is particularly suitable for locations where there is no mains connection or where the use of a corded hydraulic power unit is impractical. Typical applications for mobile hydraulic bolting systems include, for example, assembly, maintenance and repair, as well as mechanical and plant engineering.
XA2 vs. conventional unit
The comparison shows that, across the entire pressure range, the XA2 series delivers significantly higher flow rates than a two-stage, mains-powered unit. The flow rate of the latter drops immediately to a low level after the stage change – the performance of the XA2 series, on the other hand, decreases gradually, meaning it remains noticeably faster.
Typical applications for the XA2power
The XA2power is used wherever large bolted joints need to be reliably tightened or loosened, whilst mobility, speed and ease of use are required.
- Industrial assembly work in mechanical and plant engineering
- Maintenance and servicing of production plant
- Service call-outs at varying locations
- Bolted joints in confined workspaces
- Applications with high torque requirements
- Mobile work where corded or hydraulic systems are impractical
Thanks to its battery operation, the XA2power is particularly well-suited to work sites where flexibility and freedom of movement are crucial.
Who is the XA2power the right solution for?
The XA2power cordless torque screwdriver is ideal for users who:
- regularly assemble or loosen large screw connections using hydraulic screwdrivers
- want to work on the move, independent of power sources
- need a robust solution for industrial use
- value ease of use and precise torque adjustment
- are looking for a future-proof platform with options for future upgrades
The XA2power is the right choice for anyone looking for a high-performance basic solution whilst remaining open to future digital features.
You are currently viewing a placeholder content from YouTube. To access the actual content, click the button below. Please note that doing so will share data with third-party providers.
More Information- Battery operation with 2 × 28 V / 8 Ah – replaceable batteries enable off-grid operation.
- Maximum hydraulic pressure of 800 bar – designed for hydraulic applications requiring high pressure.
- Flow rate of up to 3.2 l/min at 100 bar for fast hydraulic movements.
- 0.85 l/min at 800 bar for applications requiring high hydraulic pressure.
- 0.95 kW motor power for operating hydraulic tools and systems.
- Automatic and manual operating modes to adapt to different work processes.
- Weighs 13.3 kg including batteries for mobile use of the hydraulic pump.
- Compact dimensions of 520 × 260 × 225 mm for use at different workstations.
- 2.5-litre oil capacity for supplying hydraulic power to the connected tool.
- Operating temperature range from −20 °C to +55 °C and a sound pressure level below 70 dB for a variety of working environments.
